The main > Repair> Repair of washing machines the hands

Repair of washing machines the hands

⁵⁵

Repair of washing machines the hands, we will prevent at once, business troublesome and quite risky if only you are not pros in this case. About that as it is possible to repair the washing machine the hands, will tell Infoadvisor.net today.

Happens that it is necessary to repair the faulty washing machine machine gun, and for a call of the expert there is no time or money. In this case it is possible to try to eliminate malfunction independently.

Attention! All works on repair of the washing machine as the hands need to be performed at the disconnected power supply (to switch off from the socket)!

So, repair of washing machines the hands can be carried out in case of such widespread breakages.

Zasor of the filter of the washing machine

At litter repair of washing machines with the hands the filter it is simple. It is necessary to remove the filter of drain system, to clean it and to establish into place.

Breakage (malfunction) of the drain pump

Drain pumps (pomp) at automatic washing machines break very often. Consist a pomp of so-called "snail" and the electric motor with a krylchatka. "Snail" it is possible to break unless at installation/dismantle of the washing machine, and electric motors can fail much more often.

Therefore at independent repair of the washing machine it is not obligatory to replace all pomp at all, and it is enough to replace the broken electric motor on new, serviceable. It will manage cheaper.

Separately electric part of a pomp is on sale in the service centers and it is possible to get it without special difficulties. Removal of the faulty engine is made so:

to disconnect fastening bolts to the case;
to disconnect plugs from the electric motor;
to disconnect branch pipes from "snail";
to separate "snail" from the electric motor.

Then upside-down it is necessary to make these actions for installation of the new engine.

Breakage (malfunction) of TENA

TEN — a heatheating element — also breaks often. Breakage of TENA is liked to be shown so in the advertizing Calgon'a. However "devil is not so black as he is painted". To define that the heatheater broke it is possible, first of all, having laid a hand to the machine hatch — water is not heated. In the presence in economy of a tester TEN can "ring out", to check existence of resistance and lack of breakdowns for the case.

If check showed that TEN is broken, it is necessary to replace it. For this purpose TEN should take out from the machine:

to turn off a nut;
to vtopit the screw;
slightly shaking and accurately helping a screw-driver, to take out TEN from a tank.

Then it is necessary to get new TEN — in shop will offer you just the same or suitable to your model of the washing machine. New TEN needs to be put into place.

Breakage (malfunction) of sensors of temperature

Such malfunction is most characteristic for washing machines of the Soviet sample, in modern import washing machines breakage of sensors of temperature meets much less often.

Sensors of temperature can be replaced, for this purpose it is necessary to know their type: closing (NA), disconnecting (NC), combined (NC NA), changing (ME). The closing sensors at achievement of necessary water temperature become isolated, disconnecting — respectively, are disconnected. The combined sensors have 2 couples contacts which are disconnected and becoming isolated at the necessary temperature. The changing sensors change resistance at change of temperature.

Breakage (malfunction) of belts

It is not difficult to replace the failed belts on the drive of the washing machine. It is enough to get a new belt according to marking or model of the washing machine.

Repair of the washing machine the hands in more difficult a case is extremely undesirable — it is possible to lose opportunity to restore operability of the car forever.